Posted 20 hours ago

Siraya Tech Fast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing(Grey, 1kg)

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Cast True Blu has dye and wax material that does not settle. however, the wax material will leak out of the print after printing. This will create a partially milky blue visual. This is perfectly normal. To ensure the proper use of Blu for skin-safe devices, Siraya Tech provides a guideline for cleaning, baking, and curing the resin. Though not directly linked to miniature making, we’re also fond of Siraya Tech for cutting down on the pungent smells we usually expect from resin. This makes for a slightly more pleasant printing experience, especially when working in tight areas.

Previously, 3D printer resin was not easily accessible to individuals and was limited only for industrial purposes. However, with the rise of the consumer resin 3D printers, many such resins from different brands are widely available for various purposes. You can find standard, dental, engineering, ceramic, and other liquid resin types, tailored for specific use case scenarios. Form is an affordable general model resin for laser SLA resin printers like Formlabs and Peopoly Moai. It is formulated to work with both PDMS and FEP vat commonly found on laser printers. The Form offers great resolution and surface finish while it is easy to print using the suggested setting. The most recent addition to the resin type lineup, 8K resin is designed to tap into the high-detail capabilities of 8K 3D printers and produce high-quality resin miniatures.

Fast reaches its optimal strength when the printed part is post-cured with UV after cleaning. Use 395-405nm UV light and cure for about 1-2 minutes. It is important to dry the print made by Fast completely before post-curing. There is no need to use submerge in water technique with Fast.

Fast is an affordable fast curing and non-brittle general application resin ideal for model making like tabletop minis, and figurines. Though not 100% immune to accidental drops and bumps, the likelihood of its remaining intact and structural sound is vastly higher than miniatures made with standard brittle resin. Where to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharingResin printers cure the resin by emitting a specific wavelength of UV light. With typical budget resin 3D printers, this value is 405 nm. You need to ensure that the resin you’re choosing is formulated in such a way that it cures at this wavelength and has certain flexibility in the range. This is because resin printers might not always emit light strictly at 405 nm

Phrozen Aqua 8K Resin achieves this partly due to the technology improvements of new 8K printers, but the resin’s formulation ensures superb dimensional accuracy and low shrinkage. The results are nothing short of excellent, especially with small miniatures that some lower-resolution resin printers sometimes fail to do justice. It is not a tough or engineering resin but can be mixed with Blu/Tenacious for more impact resistance. Due to higher polymer content for its outstanding mechanical properties, the ideal printing condition for Form is over 25C. It comes in only two colors, so not the best option for those not planning to prime and paint their minis. Due to higher polymer content for its outstanding mechanical properties, the ideal printing condition for Blu is over 25C.Resin is inherently a brittle material. Moreover, it never truly stops curing, and even after printing, long exposures to IPA and UV light will increase its brittleness and result in weak resin prints that snap easily. Resin is nasty stuff that can harm humans and the environment. It’s vital to take the necessary precautions while handling resin and dispose of it correctly.

Pinting miniatures requires both quality and durability, and the best resin for printing miniatures falls into one of these categories, or ideally both. Standard Resin Tenacious has the more flexibility of all our resins Make sure the support tip diameter is 1.2mm for larger prints with a depth of 0.5mm. See more full settings recommended Our commitment to excellence ensures that our resins undergo rigorous validation, guaranteeing consistent mechanical properties that meet the highest standards. We are proud advocates of an open-platform approach bolstered by a vast network of partners and a thriving user community.That said, this is a resin for the most demanding maker, and if you don’t have a keen eye for detail, then it’s likely overkill, and standard resin may serve you just as well. Busts printed using Aqua Gray 8K resin. Source: Reddit. The curing of resin using UV lights is an exothermic process and causes temperature differences in the resin part. In the resin photocuring process, it is inevitable that printed parts shrink due to thermal contraction. Most resins are developed to limit this and have a shrinkage rate of around 3%.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment